| Vipengee | Uwezo |
| uainishaji wa bodi | Msingi wa Alumini, Shaba Msingi, Msingi wa chuma, msingi wa keramik iliyofunikwa na shaba, Ubao wa Bade uliochanganywa |
| nyenzo | Ndani Alumini, shaba ya ndani, alumini iliyosafirishwa, shaba iliyosafirishwa |
| matibabu ya uso | HASL/ENIG/OSP/fedha |
| akaunti ya safu | ubao uliochapishwa wa upande mmoja/ubao uliochapishwa wa pande mbili |
| Ukubwa wa bodi ya maxi | 1200mm*480mm |
| min.board Ukubwa | 5mm*5mm |
| fuatilia upana/apsce | 0.1mm/0.1mm |
| pinda na pinda | <=0.5%(unene:1.6mm,Ubao Ukubwa: 300 * 300 mm) |
| unene wa bodi | 0.5mm-5.0mm |
| shaba mpumbavu unene | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| Uvumilivu wa digrii ya V-CUT | Uelekezaji wa CNC: ±0.1mm; ngumi: ±0.1mm |
| Usajili wa V-CUT | ±0.1mm |
| Unene wa ukuta wa shimo la shaba | 20um-35um |
| Dak usajili wa nafasi ya shimo (linganisha na data ya CAD) | ±3mil(±0.076mm) |
| Min.kuboa shimo | 1.0mm chini, 1.0mm(Unene wa ubao chini ya 1.0 mm, 1.0 mm) |
| Min.kupiga yanayopangwa mraba | 1.0mm chini, 1.0mm*1.0mm (Unene wa ubao chini ya 1.0mm, 1.0mm*1.0mm) |
| Usajili wa mzunguko uliochapishwa | ±0.076mm |
| Min.chimba kipenyo cha shimo | 0.6 mm |
unene wa matibabu ya uso | dhahabu mchovyo: Ni 4um-6um, Au0.1um-0.5um ENIG:Ni 5um-6um,Au:0.0254um-0.127um fedha: Ag3um-8um HASL:40um-100um |
| Uvumilivu wa digrii ya V-CUT | ±5(Shahada) |
| V-CUT bodi unene | 0.6mm-4.0mm |
| Upana wa Lefend | 0.15 mm |
| Min.Solder mask ufunguzi | 0.35 mm |